Skip to the main content.

Download Center

Download Software

Select the download link below. When your browser prompts you, Save the selected file to a location on your local system.

By downloading software, you expressly agree to the terms of SENS’ Software License Agreement. If the download file is a compressed zip file, you will need to extract the files from the zip to your local system before running any installations. If you do not have a tool for compressed files, you can download an evaluation version from http://www.winzip.com/downwz.htm.

Call using 800-742-2326 or 303-678-7500 or by completing the tech support contact form.

Product Software Size Description Download
MicroGenius 2, MicroGenius S2/S4, MicroCab,  EnerGenius DC and EnerGenius IQ2
Firmware updates for all devices except the Communications Protocol board. MG2/S2/S4/MicroCab Charger/Power board version 2.7.24, Extended power MG2/S2/S4/MicroCab Charger/Power board version 2.7.25, EDC Power board version 0.7.35, IQ2 Control version 2.6.207, Monitor/Accessory display/Relay boards/Battery Monitor version 6.1.15
1.3MB
Upgrade firmware to add features. Load to charger using SENS Setup Utility. Unzip this file to place contents at C:\Users\Documents\SENS Chargers\Latest Firmware. Update Power boards before Accessory/Display boards or select to “Auto Update” all devices in the SENS Setup Utility.
MicroGenius S2/S4, EnerGenius DC and IQ2
Communications Protocol Board Firmware Rev 0.7.3.15676, from versions <0.7.3
19MB
For versions earlier than 0.7.3, update using this file first. Then update using version 1.2.5.2993 Service Pack. See product user manual for instructions on how to update firmware on the Protocol Communications board.
MicroGenius S2/S4, EnerGenius DC and IQ2
Communications Protocol Board Firmware Rev 1.2.5.2993 Service Pack
405MB
For versions between 0.7.3 and 1.2.0 update to version 1.2.5.2993 using this file. See product user manual for instructions on how to update firmware on the Protocol Communications board.
MicroGenius S2/S4, EnerGenius DC and IQ2
Communications Protocol Board Firmware Rev 1.2.5.2993, from versions 1.2.0
15MB
For versions 1.2.0 and later, update to version 1.2.5.2993 using this file. See product user manual for instructions on how to update firmware on the Protocol Communications board.
MicroGenius 2, MicroGenius S2/S4, MicroCab, EnerGenius DC and EnerGenius IQ2
SENS Setup Utility Rev 3.0.43
41MB
SENS Setup Utility is a PC-based package used for advanced set-up of MicroGenius 2, S2/S4, MicroCab, EnerGenius DC, and IQ2 battery chargers/systems. Includes latest product firmware. Supported on Windows 7, 8, 8.1 and 10. Requires .NET Framework 4.6 or later.
IQ Family (Gen1 only)
IQ_Firmware_3.0.1_Upgrade (Gen1 only)
480 KB
Firmware and instructions for upgrading SENS EnerGenius IQ chargers to Release 3.0.1. The upgrade requires the use the black box data log memory card from the charger to be upgraded.
IQ Family (Gen1 only)
SENS IQ & CommsGenius Setup Utility v 1.1.2 (Gen1 only)
26.1 MB
SENS IQ & CommsGenius Setup Utility is a PC based package used to set-up SENS EnerGeniusIQ charger and communications parameters. It works with all IQ’s equipped the CommsGenius digital communications option. Supported on Windows XP,7,8,8.1,10
IQ Family (Gen1 only)
Insight V1.3.0
3.1MB
SENS Insight is no longer supported. Contact SENS Customer Service for instructions on sending black box data to SENS for analysis.
Download
Comms-Genius (IQ Gen1 only)
CommsGenius Firmware Rev 2.02 (IQ Gen1 only)
61KB
Upgrade for the IQ CommsGenius option that improves communications between the SENS IQ & CommsGenius Setup Utility and the charger
MicroGenius 150
MicroGenius Firmware Rev C to D upgrade
56KB
Firmware for upgrading SENS MicroGenius 150 chargers that improves factory calibration

Download Drawings

Use the links here to navigate to the type of document you need.

EnerGenius IQ

Mechanical CAD Drawings

Download Now

EnerGenius IQ

Output & Control Signal Wiring Diagrams

Download Now

MicroGenius 2

Mechanical CAD Drawings

Download Now

MicroGenius S2/S4

Mechanical CAD Drawings

Download Now

MicroCab 1500

Mechanical CAD Drawings

Download Now

EnerGeniusDC

Mechanical CAD Drawings

Download Now

EnerGenius IQ Gen 2 Mechanical CAD Drawings

2-D drawings are available in two formats: Adobe Acrobat format (.pdf), and AutoCAD format (.dwg).

Q2 – large case size
Q1 – small case size

MicroGenius 2  Mechanical CAD Drawings

2-D drawings are available in two formats: Adobe Acrobat format (.pdf) and drawing exchange format (.dxf). 3-D files are provided in industry standard STEP format.

Product 2D CAD Drawing 3D CAD Drawing

MicroGenius

 

 

2D CAD

pdfdxf

 

3D CAD

stp

 

MicroGenius S2/S4  Mechanical CAD Drawings

2-D drawings are available in two formats: Adobe Acrobat format (.pdf) and drawing exchange format (.dxf). 3-D files are provided in industry standard STEP format.

Model Type 2D CAD Drawing 3D CAD Drawing
S2 Models

2D CAD

pdfdxf

 

3D CAD

stp

 

S4 Models

2D CAD

pdfdxf

3D CAD

stp

MicroCab 1500  Mechanical CAD Drawings

2-D drawings are available in two formats: Adobe Acrobat format (.pdf) and drawing exchange format (.dxf). 3-D files are provided in industry standard STEP format.

Product 2D CAD Drawing 3D CAD Drawing Expansion
MicroCab 1500

2D CAD

pdf dxf

 

3D CAD   Base Model

stp

 

With Expansion Bay

stp

EnerGenius DC Mechanical CAD Drawings

2-D drawings are available in two formats: Adobe Acrobat format (.pdf), and drawing exchange format (.dxf). 3-D files are provided in industry standard STEP format.

Charger Model 2D CAD Drawing 3D CAD Drawing
EDC Accessory Shelf

2D CAD

pdf  dxf

 

3D CAD

stp

 

EDC Single Shelf

2D CAD

pdf  dxf

 

3D CAD

stp

 

EDC Double Shelf

2D CAD

pdf  dxf

 

3D CAD

stp

 

EDC Keypad/Display

2D CAD

pdf  dxf

 

3D CAD

stp

 

EDC Compact

2D CAD

pdfdxf

 

3D CAD

stp

 

EDC Wallbox

2D CAD

pdfdxf

 

3D CAD

stp

 

EDC Cabinet

2D CAD

pdfdxf

 

3D CAD

stp