Software Download Center
Select the software download link below. When your browser prompts you, save the selected file to a location on your local system.
By downloading software, you expressly agree to the terms of SENS’ Software License Agreement. If the download file is a compressed zip file, you will need to extract the files from the zip to your local system before running any installations. If you do not have a tool for compressed files, you can download an evaluation version from http://www.winzip.com/downwz.htm.
| Product | Software | Size | Description | Download |
|---|---|---|---|---|
MicroGenius 2, MicroGenius S2/S4, MicroCab, EnerGenius DC, SuperTorque 8Z, SuperTorque 8R, PowerCab2, and EnerGenius IQ2 |
SENS Setup Utility Rev 3.0.97 |
41MB |
SENS Setup Utility is a PC-based package used for advanced set-up of MicroGenius 2, S2/S4, MicroCab, SuperTorque 8Z/8R, EnerGenius DC, PowerCab2, and IQ2 battery chargers/systems. Includes latest product firmware. Supported on Windows 7, and later. Requires .NET Framework 4.6 or later. |
|
MicroGenius 2, MicroGenius S2/S4, MicroCab, EnerGenius DC, SuperTorque 8Z, SuperTorque 8R, PowerCab2, and EnerGenius IQ2 |
Firmware updates for all devices except the Communications Protocol board. MG2/S2/S4/MicroCab/8Z/8R Charger/Power board version 2.7.59, Extended power MG2/S2/S4/MicroCab/PowerCab2 Charger/Power board version 2.7.52, EDC/PowerCab2 Power board version 0.7.45, IQ2 Control version 2.6.210, Monitor/Accessory display/Relay boards/Battery Monitor version 6.2.4. Type C Battery Sensor version 1.3.7. |
1.3MB |
Upgrade firmware to add features. Load to charger using SENS Setup Utility. Unzip this file to place contents at C:\Users\Documents\SENS Chargers\Latest Firmware. Update Power boards before Accessory/Display boards or select to “Auto Update” all devices in the SENS Setup Utility. |
|
MicroGenius S2/S4, EnerGenius DC and IQ2 |
Communications Protocol Board Firmware Rev 0.7.3.15676, from versions <0.7.3 |
19MB |
For versions earlier than 0.7.3, update using this file first. Then update using version 1.2.9.3166 Service Pack. See product user manual for instructions on how to update firmware on the Protocol Communications board. |
|
MicroGenius S2/S4, EnerGenius DC and IQ2 |
Communications Protocol Board Firmware Rev 1.2.9.3166 Service Pack |
405MB |
For versions between 0.7.3 and 1.2.0 update to version 1.2.9.3166 using this file. See product user manual for instructions on how to update firmware on the Protocol Communications board. |
|
MicroGenius S2/S4, EnerGenius DC and IQ2 |
Communications Protocol Board Firmware Rev 1.2.9.3166, from versions 1.2.0 |
15MB |
For versions 1.2.0 and later, update to version 1.2.9.3166 using this file. See product user manual for instructions on how to update firmware on the Protocol Communications board. |
|
IQ Family (Gen1 only) |
IQ_Firmware_3.0.1_Upgrade (Gen1 only) |
480 KB |
Firmware and instructions for upgrading SENS EnerGenius IQ chargers to Release 3.0.1. The upgrade requires the use the black box data log memory card from the charger to be upgraded. |
|
IQ Family (Gen1 only) |
SENS IQ & CommsGenius Setup Utility v 1.1.2 (Gen1 only) |
26.1 MB |
SENS IQ & CommsGenius Setup Utility is a PC based package used to set-up SENS EnerGeniusIQ charger and communications parameters. It works with all IQ’s equipped the CommsGenius digital communications option. Supported on Windows XP,7,8,8.1,10 |
|
IQ Family (Gen1 only) |
Insight V1.3.0 |
3.1MB |
SENS Insight is no longer supported. Contact SENS Customer Service for instructions on sending black box data to SENS for analysis. |
|
Comms-Genius (IQ Gen1 only) |
CommsGenius Firmware Rev 2.02 (IQ Gen1 only) |
61KB |
Upgrade for the IQ CommsGenius option that improves communications between the SENS IQ & CommsGenius Setup Utility and the charger |
|
MicroGenius 150 |
MicroGenius Firmware Rev C to D upgrade |
56KB |
Firmware for upgrading SENS MicroGenius 150 chargers that improves factory calibration |
|
SC4 Site Controller Unit |
Firmware updates v 1.45 for the SC4 Site Controller. |
9.7MB |
Upgrade firmware to add features. Load to SC4 according to the SC4 Firmware Update Procedure. |
|
SCMini-XC Small Systems Controller Unit |
Firmware updates v 1.13 for the SCMini-XC Site Controller. |
7.4MB |
Upgrade firmware to add features. |