PowerCab™2

• Standard: energy storage/batteries, power conversion/chargers, electrical distribution and load centers, HMI interface, AC/DC breakers

• Optional: battery monitoring, high interrupt breakers, shunt-trip breakers, bus bars/bulk termination, wire marking (PIP compliance), redundancy, inverters, and transfer switches.

• Yes, the PowerCab2 can be ordered with a single part number, while incorporating the application specifics and customizing the battery choice and cabinet configurations.

• A piecemeal DC system requires installers to assemble racks, mount and wire battery cells, size protective devices, run conduit, and integrate chargers and panels—often with parts from multiple sources. In contrast, the UL-Listed SENS PowerCab2 is fully engineered, factory-assembled in an ISO9001-2015 facility, and fully tested before shipment. It arrives ready to install, eliminating guesswork, missing parts, and extra labor. This shortens installation time, lowers cost, and provides a predictable in-service date.

Yes, the PowerCab2 is available in NEMA 1 for indoor applications and NEMA 3R for outdoor applications. Salt batteries or high temperature VRLA batteries are recommended for outdoor applications.

• It is specifically engineered for hardened industrial applications like utility, oil and gas, and other mission critical applications.

• Every component is factory assembled, tested, and arrives on-site ready to be wired, commissioned and quickly put into service.

• Our state-of-the-art silicon-carbide switchmode power conversion technology offers the most robust rectification in the smallest footprint matching the demand for any customer.

• The biggest safety risk in DC systems is lifting and handling batteries. In the PowerCab2, batteries are factory-installed, wired, and secured, eliminating hazardous on-site lifting. The entire cabinet can be positioned with a forklift, pallet jack, or crane. 

• PowerCab2 uses dead-front panels to keep all internal components touch-safe when the doors are open, preventing accidental contact with live terminals. Most “build-your-own” systems offer only minimal or no protective covers.

• The charger, battery, distribution panel, and cabinet are all UL-listed—something many assembled-on-site systems lack. 

Yes, the PowerCab2 is UL/C-UL listed for installations across the US and Canada.

The PowerCab2 is designed to all North American and IEEE seismic requirements including OSHPD. Testing to be completed in Q2 2026.

A piecemeal DC system requires installers to assemble racks, mount and wire battery cells, size protective devices, run conduit, and integrate chargers and panels—often with parts from multiple sources. In contrast, the UL-Listed SENS PowerCab2 is fully engineered, factory-assembled in an ISO9001-2015 facility, and fully tested before shipment. It arrives ready to install, eliminating guesswork, missing parts, and extra labor. This shortens installation time, lowers cost, and provides a predictable in-service date. 

Component cost is only a small part of total project expense. Engineering, purchasing, installation, on-site testing, approvals, and after-sale support add significantly. Many users also report smoother AHJ approvals with a UL-Listed, factory-built cabinet versus an on-site, a-la-carte system. Because it reduces engineering and installation labor, PowerCab2 often delivers the lowest total cost compared to “build-your-own” DC systems. 

PowerCab2’s battery and DC load breakers are 2-pole UL 489 listed at 14,000 AIC (amps interrupting current) at 125 volts DC. This is substantially higher than any other compact circuit breaker on the market. 

• Standard: your choice of Sodium Metal Chloride (Salt Batteries), front terminal VRLA, high temperature TPPL VRLA, AGM. 

• SENS can integrate other chemistries as specified, including Lithium Titanate Oxide (LTO). 

• SMC batteries are ideal for low-rate loads (3–12 hours), extreme temperatures, high safety requirements, and long, maintenance-free life. 

• Sodium-Metal-Chloride chemistry delivers long life even in high heat, a compact footprint, and built-in intelligence through per-module battery management. 

• Salt batteries require no HVAC and outperform many technologies in both hot and cold environments, operating continuously from –20°C to +60°C with IP55 protection. 

• VRLA is an industry standard economical battery with performance that matches many indoor switchgear application load profiles.

• The PowerCab2 can be configured with parallel VRLA battery strings for N+1 brute force reliability. 

• Front terminal batteries enable easy operation, maintenance and fast change-out if needed. 

Choose LTO if you need an extremely high-rate capable battery in the smallest footprint, wide temperature range, and long calendar life. 

No clearance is required in back or on the sides. PowerCab2 employs thermostatically controlled forced-air cooling, entering through the front door and exiting the top rear of the cabinet. Because of this, the sides can be mounted essentially flush with walls or other equipment. It is recommended to leave a few inches beyond the exhaust hood of the cabinet.