
>>>>>DO NOT FORGET to change the version number in index.html

Web Page Revision Log
01/18/2021 MQ 1.41 Corrected a bug with the Port selection Combo Box in the Split String
                   configuration panel.
10/09/2020 MQ 1.40 Added changes for RunTime and cleaned up some bugs.
02/07/2019 MQ 1.32 Added All Strings button to the Ripple Current Alarm setup.
                   Added string and jar ripple voltage display.
01/30/2019 MQ 1.31 Modify Site Setup screen so the disable "no ethernet reset" check box
                   only appears in PBT mode. 
01/16/2019 MQ 1.30 Improved handling of the firmware version display for the P-BUS device
                   upload.  The display is erased when download starts and reappears with
                   the new version when completed.	
12/29/2018 MQ 1.29 Added Debug info on the set IP web page.
12/21/2018 MQ 1.28 Added Battery Sensor total poll and error counter display.
12/14/2018 MQ 1.28 Added Disable Ethernet Reset checkbox to site setup.
12/06/2018 MQ 1.27 Fixed the coloring of the Circuit Breaker Button when a ROM that is not
                   connected is specfied in the spinner. 
11/27/2018 MQ 1.26 Added CellMetrix logging.
10/29/2018 MQ 1.25 Changed discharge times from 16 bit to 32 bit numbers.
10/26/2018 MQ 1.24 Made two changes in UpdateCellMetrixDisplay() to fix a bug that was using 
                   the ambient temperature RIM status when coloring the temperature display,
                   rather than the RIM associated with the temperature measurement.
10/23/2018 MQ 1.23 Modified the upload.java update function so that the controls are
                   synced with the controller to fix the reset operations.
10/09/2018 MQ 1.22 Added the USB Flash Drive Status alarm to the Site Setup page.
10/04/2018 MQ 1.21 The poll and error counter button on the main rem page now clears
                   all the P-BUS poll and error counters, not just the totals. 
09/26/2018 MQ 1.20 Fixed the string setup display so that the disable discovery,
                   set string name, and set dischrge current source controls do not
                   appear if ther is not string. 
08/31/2018 MQ 1.19 Fixed the updating for the RemoteAgents main page so the discovery
                   message amd button colors are updated.
08/30/2018 MQ 1.19 Fixed the Combined virtual single string display so it displays the
                   temperature properly during a discharge.
08/01/2018 MQ 1.18 Fixed an update bug in the single Split String Display.
                   Fixed a bug in the Single Cell Display that was displaying the equalize
                   seconds incorrectly. 
07/31/2018 MQ 1.18 Added the Reset All Discharge Times and Event Counts to the Site Setup
                   web page.
                   Fixed the update for the AddString screen.
06/25/2018 MQ 1.17 Second attempt to fix the upload problem.
06/21/2018 MQ 1.16 Fixed UploadFirmware.  It was loading the CMI firmware into the Battery sensor
                   when it first starts running.
06/19/2018 MQ 1.15 Added Birth Certificate pages. 
                   Added the delete string button to the AddString Page.
05/30/2018 MQ 1.14 Added the changes requested by Telus in Derek's email to Frank on 2/19/2018.
		   Cleaned up some Return To... button issues following Next or previous in
                   combined string setup screen.
05/25/2018 MQ 1.13 Added FreeDriveSpace.
05/09/2018 MQ 1.12 Fixed a bug that crashed the java aplet when the current sensor specfied for
                   a combined string is an invalid number.
04/23/2018 MQ 1.11 In the Single Jar Web page, force microOhm reading to NA when the Admittance
                   measurement is pending.
04/02/2918 MQ 1.10 Corrected a bug in the analog alarm screen that ws preventing the TAB from 
                   working in the Deadband Field.
03/29/2018 MQ 1.09 Corrected a bug that was displaying the wrong title on the String Information
                   page.	
03/22/2018 MQ 1.08 Corrected a bug that was causing the ROM number displayed in the Circuit Breaker
                   Control Panel to display 0 when the value was set to something else.
03/20/2018 MQ 1.08 Fixed the Electrolyte level display in the single Jar display so it is only 
                   displayed for the proper harw=dware versions.  
03/20/2018 MQ 1.08 Changed version.
02/07/2018 MQ 1.07 Corrected a bug in the site setup page that blocked the operation of
                   the Setup Virtual String Radio buttons following a virtual string access.
01/25/2018 MQ 1.07 Added Enable Alarm Annunciator check box to the CellMetrix System Setup panel.
                   Color the Critical Event, Thermal Runaway and Batter Aging Buttons magenta
                   on hardware failures that will prevent these features from operating correctly.
12/22/2017 MQ 1.06 Modified the SC4 temperature field so it will not display an errorValue. 
                   Improved singleCellScreen updating.
10/27/2017 MQ 1.05 Fixed a bug that was mishandling the Highest Battery Sensor Temperature display in
                   the CellMetrix Group Temperature box when there were alarms or other issues with the
                   string. 
10/24/2017 MQ 1.05 Fixed a bug that was displaying cellMetrix alarm descriptions inside discrete alarm 
                   group boxes from the singleString display. 
10/17/2017 MQ 1.05 Fixed a bug in cellMetrix.java that was causing the web page navigation to get lost when
                   swithing between strings and groups without sensors while using the next and previous 
                   buttons in the single string screen. 
08/23/2017 MQ 1.04 Fixed a bug that was hanging the SC4 when the Site Name was changed following 
                   a CellMetrix change.
07/25/2017 MQ 1.03 Fixed a bug in Manage Virtual Strings where the CellMetrix group was being set,
                   and it was blocking the changing of the substring configuration (object 49, operation 26)
06/14/2017 MQ 1.02 Removed backdoor password.
05/16/2017 MQ 1.01 Fixed a bug where the CMI poll and error counters were being displayed with the 
                   admin password.  Added an Are You Sure message to copy discrete alarms... functions. 
05/04/2017 MQ 1.00 First official release.  Sent to Charter.
04/xx/2017 MQ 0.15 Added use of current sensor on RIM to get Discharge Current.
09/08/2016 MQ 0.10 Removed Discharge Current Field.
                   Changed Equalization to Battery Balancing.
                   Removed Copy Calibration to Entire String Button, adjusted current panel slightly.
                   Require back door password to view poll and error counters on remote device main page.     
04/25/2016 MQ 0.07 Changed String to Port on Virtual string screens. Requested by Telus.
03/16/2016 MQ 0.06 Fixed RIM discrete alarm display.  Relocated the string objects in the message,	
02/12/2016 MQ 0.05 Fixed the bugs that were displaying RIM 5 with the wrong input mode and alarm
                   data.
02/02/2016 MQ 0.04 Corrected flashing checkboxes in Analog alarm screen,
                   equalize enable and a few other places.
06/29/2015 MQ 0.02 First jar file.
...        MQ 0.01 Copied from SC3-XL and modified.
